get the switch replaced? karrs2fix and other Buick Specialists are ready to help you Ask your own question now Customer: replied3 years ago. It's been a couple years since I got to use cruse. characters left:
When mine quit, I checked, and the light was out. Anyone had this problem? if they are okay, then do a leak test on the servo. Last edited by Kolbuc; 09-15-2014 at 03:30 AM.
Please let us know if we can be of assistance, or if we can connect you with a representative from GM Canada that can best assist. You would think Buick dealerships would scan the odb2 codes before and after service recalls and/or Buick would have these re-learn/recalibration steps built in to the step-by-step process when performing these While driving without cruise control may be an inconvenience, a sudden failure of the cruise control system could be potentially dangerous for a driver who is not vigilant. If you'd like to provide us with the last 8 digits of your VIN we can check for any service announcements associated with this issue.
However, I'm glad to see that you were able to get in touch with your dealership regarding these concerns. The PDF file is a copy print fom the shop manual which shows the pin diagram for the only connector on the cruise control module. Ask your question now. 1998 Buick Lesabre Cruise Control Not Working Sıradaki Repair Buick LeSabre P0102 MAF Trouble - Süre: 11:47.
it might be cracked. 2001 Buick Lesabre Cruise Control Not Working After you verify the ground connection the next step will be to use the documentation i posted to check all of the inputs at the pins on the connector. This isn't like replacing an alternator.... http://www.justanswer.com/car/7l55g-buick-century-custom-stop-cruise-control.html They simply divide the schematics into two graphics to keep things from getting too cluttered.
adaboy is offline Quote Quick Reply post #4 of 15 (permalink) Old 09-14-2014, 12:21 PM Captainjohn Junior Member Join Date: Aug 2014 Location: Ohio Posts: 7 Thought I was 2004 Buick Lesabre Cruise Control Speed will fall back 5mph and will then speed up to the selected speed. Get a quote Choose from 600+ repair, maintenance, and diagnostic services, backed by our 12-month, 12,000-mile warranty. Could I take off the module and test it?
The Following User Says Thank You to Tech II For This Useful Post: Beetlegrinder(06-03-2014) 06-03-2014, 12:32 AM #7 Beetlegrinder Junior Member Join Date: Oct 2013 Posts: 8 Thanks: 7 http://buickforums.com/forums/threads/25113-Cruise-Control-problems South Main Auto Repair 25.972 görüntüleme 11:47 Buick - Cruise Control: Update (1993) - Süre: 23:02. 2001 Buick Century Cruise Control Problems Get a Professional Answer Via email, text message, or notification as you wait on our site.Ask follow up questions if you need to. 100% Satisfaction Guarantee Rate the answer you receive. 2003 Buick Lesabre Cruise Control Problems We're very pleased to hear Jake Sweeney Chevrolet was able to address the issues with your brake pedal sensor and cruise control.
In general when you have any problem with an electronic module on the car, its a good idea to track down all the ground locations required by the module and clean this content Each system documented in the service manual usually includes a "description and operation" section which simply details the operation of the subject system in paragraph form. THANK YOU FOR HELPING [email protected] Mark helpful 40 Report Billybob45 answered 4 years ago What speed sensors are you refering to up by the throttle and one behind the power steering If you can't afford the dealer diagnostic fee then I can try my best to point out cheap alternative methods. 2000 Buick Lesabre Cruise Control Switch Replacement
Inputs: Cruise ON Switch (located on the turn signal lever) Cruise Set/Coast Switch (located on the turn signal lever) Cruise Resume/Accel Switch (located on the turn signal lever) Brake Pedal Switch Düşüncelerinizi paylaşmak için oturum açın. Mark helpful 0 Report Lupita888 answered 5 years ago Hi Jim, would you please help me with a circumstance on my SUV Buick Rendezvous 2003, Courtesy Lights stay ON even if weblink I hope they iron out these wrinkles for other Buick owners as this was not a pleasant experience.
Remove the nut, pull off the ground terminal and scrub everything with a wire brush until you have bare metal with no corrosion, rust or paint, then put the terminal back 2001 Buick Lesabre Cruise Control Switch Kind regards, Shane M. Some scan tools can override this circuit. --Square wave signal at pin K, Dark Green when the drive wheels are spinning with the engine running and transmission in gear. 3.
The cruise control system is really simple. After code 12 you will get the fault codes. Captainjohn is offline Quote Quick Reply post #5 of 15 (permalink) Old 09-14-2014, 12:29 PM Captainjohn Junior Member Join Date: Aug 2014 Location: Ohio Posts: 7 Amber - my 2000 Buick Lesabre Cruise Control Problems I'm posting the PDF link right here because I don't want it to get lost below the relatively large schematic images.
Replace all the vacuum lines? How it's done: The mechanic will first want to connect to the vehicle’s ECU through a code reader/scanner. Posts: 1,646 Thanks: 57 Thanked 670 Times in 510 Posts Like I said, about a 5 minute job..... http://zenlinux.org/cruise-control/s10-cruise-control-not-working.html This is all of the information listed under the "description and operation" section of the factory service manual.
A faulty ground is also really simple to fix. Automotive Network, Inc., Copyright ©2016 How it works Services Pricing AdviceArticles & QuestionsOver 25,000 topics, from beginner tips to technical guidesEstimatesInstant auto repair estimatesAsk a MechanicFast, free answers from certified mechanicsPartsResearch they are all ok, I went throught the diagnostics on alldata.com, and at step 6 my answer is 'no'. Is my servo bad?
I think my problem is in the resume/set button, how do i get to it? Push the brake.